Skip to end of metadata
Go to start of metadata

Section:  Operator Guide
Topic:  Assigning a part to a dedicated location

Procedure Number: 09-112


Summary

This guide will provide you with step-by-step instructions on assigning a part to a dedicated location.



Procedure

There are three steps to Assigning a part to a dedicated location:

1. Access Location Browse from the Utilities Menu
2. Assign part number to location
3. Set Dedicated Flag




1. Access Location Browse from the Utilities Menu

  1. Click Locations,
  2. Click Location Browse,
    See figure 1.

Figure 1.


2. Assign part number to location

  1. Locate and click on the desired location to select it.
  2. Enter Modify Mode:
    1. Press Ctrl+M or navigate to the Options menu and select Modify Records
  3. Assign part number:
    1. Click in the Part_Number field, type in the Part number. See figure 2.
      Note:Please stay in Modify Mode for step 3.

Figure 2.


3. Set Dedicated Flag

  1. Click in the Dedctd field, type the word True in place of the word False
    See figure 3.
  2. Press esc on the keyboard to save and exit.

Figure 3.

Labels
  • None